WORKSHOP
Have a look at some of the services we have to offerSTANDARD SERVICE – £85
⦁ Check and Adjust brakes, replace pads and cables if needed. (excludes bleeding brakes this is a extra charge)
⦁ Check and Adjust gears, Lubricate chain and derailleurs and replace cables if needed.
⦁ True both wheels and check for wear on rims.
⦁ Externally check hubs, headset and bottom bracket for wear.
⦁ Check tyre pressures and tyre wear.
⦁ Safety check all nuts and bolts are correctly tightened.
DELUXE SERVICE – £140
⦁ ALL THAT YOU GET WITH A STANDARD SERVICE, PLUS
⦁ Strip and re grease hubs.
⦁ Remove bottom bracket out of the frame, clean threads and re chase if needed, re grease and fit.
⦁ Strip and clean headset, re grease and resemble.
Cleaning with a service £20 with a standard or deluxe service.
WCC PLATINUM SERVICE £200
- The same as a deluxe service.
- Full clean.
- Drive chain clean.
- Finished off with FREE GTECHNIQ CERAMIC COATING! Find out more about GTECHNIQ
PUNCTURES AND TYRE FITTING
⦁ £10 wheel only.
⦁ £15 if the wheel is in a bike.
⦁ £20 for a hub geared or ebike with motor in rear wheel.
⦁ £15 to set up as tubeless + sealant, tape & valves
REPLACEMENT OF FULL SUSPENSION PIVOT BEARINGS IS CHARGED AT £60 PER HOUR.
GEAR SERVICE,
⦁ £25 cable operated.
⦁ £30 Di2 firmware updated and set up.
BRAKE SERVICING,
⦁ £25 caliper brakes.
⦁ £25 v-brakes.
⦁ £25 per brake to bleed and set up disc brake.
WHEEL BUILDING,
⦁ £45 per wheel.
⦁ £55 if we need to strip old wheel and reuse old rim/hub.
WHEEL TRUE – £15 FOR WHEEL ONLY
TO REPLACE A SPOKE WE ADD, (SEE BELOW).
⦁ £3 to remove cassette.
⦁ £3 to remove a disc.
⦁ £5 to remove tyre/rim tape.
⦁ £10 for tubeless ready,plus tape.
FITTING COSTS OF,
⦁From £25 bottom bracket.
⦁From £25 headset (integrated cables we can quote)
⦁ £30 forks.
⦁ From £30 full guards, £15 race blades.
⦁ £15 fit bar tape and strip old off.
⦁ £5 pedals.
SUSPENSION SET UP FOR RIDER – £20
SUSPENSION SERVICING FROM – £120
INSURANCE QUOTE/INSPECTIONS – £15
Please note that prices do not include PARTS.
Specialist Areas
We have a wealth of knowledge from the guys in the workshop at the moment that includes:
- Wheel building
- Tubeless set ups
- Suspension set up
- Trained on Shimano Di2
- Custom builds on mountainbikes and road